Anderson Manufacturing
Anderson Item Number 012CPH
Anderson Item Number 150
Anderson Item Number 155
Anderson Item Number O55
Anderson Item Number 135
Anderson Item Number 140N
Anderson Item Number O52
Anderson Manufacturing Item Number: O45
Anderson Mfg Item Number 152
Anderson Item Number 105N
Anderson Item Number 120
Anderson Item Number O20
Anderson Item Number CPH18
Anderson Item Number 125
Anderson Item Number 165
Anderson Item Number 520
Anderson Item Number 180
Anderson Item Number O80
Anderson Item Number 175
Anderson Item Number 535
Anderson Item Number 555
Anderson Item Number O70
Anderson Item Number 112N
Anderson Mfg Item Number AND560
Anderson Item Number 190
Anderson Item Number 570
Anderson Item Number FS4B
4 Oz Tube Blue
Nitrile rubber-based sealant provides a strong adhesive bond to most any material found around the swimming pool, even vinyl. Squeeze from the tube directly onto the material to be sealed. Flexible Sealer will skin over in seconds allowing it to be flattened with a wet finger. Cures flexible in minutes to hours depending on application thickness.
Seal vinyl leaks with or without a patch.
Seal between liner and face plates or fittings.
Use as a thread sealant or on small suction side plumbing leaks.
Seal small cracks in gunite or plaster.
Can be applied underwater.
Anderson Item Number WDP150
fits 1-1/2" Threads
Allows plumbing lines to be winterized without draining the pool. The patent-pending "duck-bill" valve allows a large flow of air and water to be blown from the return plumbing but does not allow water back into the lines.
HOW TO USE:
Install plugs into all lines. The double-seal system provides a water tight seal at the face plate or inside the fitting.
Use a blower to clear all lines. The Winter Duck Plug provides adequate back pressure to allow all returns to be cleared at the same time without "burping."
Once all returns have been bubbling for several minutes turn off the blower. Water will not enter the pipes from the pool.
Add optional antifreeze to lines and turn on the blower again until you see some antifreeze blown into the pool.
Install yellow "safety caps" for added piece of mind and protection against ice movement.
Anderson Item Number BT15
15 Ft Roll
Hand moldable rubber gap filler can be applied underwater without messy caulk guns or mixing. Retains a flexible and tacky consistency making it well suited for a variety of permanent or temporary leak stopping applications.
Pack around light cable to seal or prevent leaking light conduit (removable).
Replace rubber gaskets with or without removing fitting.
Fill/seal cracks gaps or voids.
Hold in place with a cast of Quick Set Epoxy for pipe repairs.
Anderson Item Number FD601
8 Oz Fluorescent Yellow
Flip top lid allows spill-free refilling of Fluorescent Yellow Dye Testers
Anderson Item Number LD601
8 Oz Blue
Flip top lid allows spill-free re-charging of Dye Testers.
Anderson Item Number DT665
Blue
Back of product package provides simple instructions for doing a "bucket test" and using the Dye Tester to find simple leaks, and also outlines the problems associated with a leaking pool.
Anderson Item Number FS4W
4 Oz Tube White
Nitrile rubber-based sealant provides a strong adhesive bond to most any material found around the swimming pool, even vinyl. Squeeze from the tube directly onto the material to be sealed. Flexible Sealer will skin over in seconds allowing it to be flattened with a wet finger. Cures flexible in minutes to hours depending on application thickness.
Seal vinyl leaks with or without a patch.
Seal between liner and face plates or fittings.
Use as a thread sealant or on small suction side plumbing leaks.
Seal small cracks in gunite or plaster.
Can be applied underwater.
Anderson Item Number PQ501
Hand-moldable epoxy putty in a convenient "one Stick" format hardens above or below the water to an "off-white" color.
Aggressive adhesiveness and a fast, 5-minute cure time make Leakmaster Quick Set the logical choice for a multitude of non-cosmetic repairs.
Anderson Item Number 120N
Fits 1" Pipe / 3/4" Socket
Anderson Item Number 9908K
14 Oz Black
Two part hand moldable epoxy putty cures in 40-60 minutes to a variety of colors. Craftsman quality formulation smooths and feathers nicely underwater without excessive clouding, making A+B Putty the perfect choice where appearance is important.
Fill and repair cracks in plaster, concrete, fiberglass and acrylic
Repair cracks in skimmers, main drains and fittings
Anderson Item Number 9906K
15.5 Oz Gray
Two part hand moldable epoxy putty cures in 40-60 minutes to a variety of colors. Craftsman quality formulation smooths and feathers nicely underwater without excessive clouding, making A+B Putty the perfect choice where appearance is important.
Fill and repair cracks in plaster, concrete, fiberglass and acrylic
Repair cracks in skimmers, main drains and fittings
Anderson Item Number 9904K
14 Oz White
Two part hand moldable epoxy putty cures in 40-60 minutes to a variety of colors. Craftsman quality formulation smooths and feathers nicely underwater without excessive clouding, making A+B Putty the perfect choice where appearance is important.
Fill and repair cracks in plaster, concrete, fiberglass and acrylic
Repair cracks in skimmers, main drains and fittings
Anderson Item Number PP701
Hand-moldable epoxy putty in a convenient "one Stick" format hardens above or below the water to an white color. Aggressive adhesiveness and a fast, 20-60 minute cure time make Leakmaster Pool Repair Putty the logical choice for a multitude of cosmetic repairs.
Anderson Item Number FT601
Florescent Yellow
Anderson Item Number DT601
Blue
Anderson Item Number GLV26
Anderson Item Number GLV26XL
Anderson Item Number 170
2" Socket



